1. Open the box

2. Replace the battery

Twist the battery to remove it from the strips and replace it with the new battery using the same procedure.

3. Remove the old wiring

Press the grey terminal block with a pointed object to remove the wires.

4. Insert the new wires

Replace the black and red wires with those from the new battery.

5. Close the box

6. Switch on the station

Use the magnet to switch on the station by moving it in a circular motion around the circle on the side of the station.

You will receive data on your phone within 10 minutes. If the weather station is stuck in initialization or cannot be turned on, repeat the previous steps without changing the battery. Wait at least 30 seconds from disconnecting the power until you reconnect it again.