1. Open the service box

2. Remove the battery

Wiggle the battery to remove it from the strips and disconnect the wire marked C6 from the old battery.

3. Insert the new battery

Replace the old battery with the new battery and connect the C6 wire to the new battery.

4. Close the service box

5. Switch on the station

Use the magnet to switch on the station by moving it in a circular motion around the circle on the side of the station.

You will receive data on your phone within 10 minutes. If the weather station is stuck in initialization or cannot be turned on, repeat the previous steps without changing the battery. Wait at least 30 seconds from disconnecting the power until you reconnect it again.